Categories
Raspberry Pi User Help

Problems with Huawei me909u521 modem in Raspberry Pi 3 b+

I have the Huawei me909u521 modem attached to RPi 3 b+ via sixfab LTE hat (connected by GPIO). The Rpi is detecting the modem: pi@raspberrypi:~$ lsusb Bus 001 Device 004: ID 12d1:1573 Huawei Technologies Co., Ltd. Bus 001 Device 005: ID 0424:7800 Standard Microsystems Corp. Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB […]

Categories
Raspberry Pi User Help

Configure back to normal wifi station after access point mode (hostapd)

I have set up access point according to the manual https://www.raspberrypi.org/documentation/configuration/wireless/access-point-routed.md on respberry pi 4b. It works fine. Now I need to disable AP and connect my Rpi to a router. This is a short log of what I do: stop hostapd and restart wpa_supplicant and networking pi@kyb-pi4 ~> sudo systemctl stop hostapd pi@kyb-pi4 ~> […]

Categories
Linux Mastering Development

Can’t connect to the Internet from jail on XigmaNas inside Hyper-V

I installed XigmaNas 12.1.0.4 inside Hyper-V virtual machine. XigmaNas has access to the Internet. But from jail AeMcSiteJail I can’t connect to the internet. I can connect other jails and XigmaNas, but can’t ping any other devices. What should I do to allow internet connection inside jail? jls command on XigmaNas output: JID IP Address […]

Categories
Raspberry Pi User Help

USB Ethernet / RNDIS is working over my desktop computer but not from my android phone

After following some guides, I was able to get a USB SSH connection working from my Windows 10 computer into my Raspberry Pi 4. It won’t work on my phone though, even though my phone is capable of tethering. I’ve tried both the ‘IP Neighbors’ method and also the static IP address as recommended by […]

Categories
Mastering Development

Ifconfig command doesn’t show wifi adapter

I have a little problem. I have 2 wifi adapters at home (1 TP-link T2U AC600 plus and a TP-link T4U AC1300), I installed the driver and have acces to the internet. So I think the configuration went well. The problem is, when I enter the Ifconfig command on my macbook it doesn’t recognize the […]

Categories
Raspberry Pi User Help

Connect WiFi and Ethernet simultaneously

I’m trying to connect the raspberry to the ethernet and wifi at the same time, but don’t work. Raspberry infos: Model: Pi Model 3B+ V1.3 /etc/dhcpcd.conf: # A sample configuration for dhcpcd. See dhcpcd.conf(5) for details. # Allow users of this group to interact with dhcpcd via the control socket. #controlgroup wheel # Inform the […]

Categories
Raspberry Pi User Help

WIFI Direct ( Wifi p2p) disconnection after 10 second

I’m trying to connect android and Raspberry PI using WIFI Direct. It is connected successfully but it’s the disconnect after 10 seconds automatically. My configuration file is as per below /etc/wpa_supplicant/wpa_supplicant.conf ctrl_interface=/var/run/wpa_supplicant country=IN ap_scan=1 device_name=rasberry device_type=1-0050F204-1 driver_param=use_p2p_group_interface=1 p2p_go_intent=15 p2p_go_ht40=1 p2p_listen_reg_class=81 p2p_listen_channel=1 p2p_oper_reg_class=81 p2p_oper_channel=1 network={ ssid="DIRECT-Ke" bssid=52:6d:c8:0d:bf:4c psk="Y2s38gWz" proto=RSN key_mgmt=WPA-PSK pairwise=CCMP auth_alg=OPEN mode=3 disabled=2 } network={ […]

Categories
User Help

how to access wifi adapter from wsl 2 and use aircrack

Please can i use aircrack on kali linux without buying a new adapter because i don’t want to buy an external adapter but i would like to use aircrack , i know that microsoft has not yet solved this, but is there a work around(even if it would cause security issues) EDIT: ifconfig gives me […]

Categories
User Help

routing through wireguard tunnel interface on client host

I’d like to use wireguard as my VPN solution. I use mullvad, so I can use their servers and keys for configuration. After I do sudo wg-quick up wg0, I connect: interface: wg0 public key: <client public key> private key: (hidden) listening port: 52065 fwmark: 0xca6c peer: <peer public key> endpoint: <EndpointIPaddr>:51820 allowed ips: 0.0.0.0/0, […]

Categories
Mastering Development System & Network

LLDP packets from UniFi WAP causing dropped packet counter to increase on Proxmox server

I have two UniFi UAP-AC-Pro WAPs on my network that are generating LLDP packets that are causing the received frame dropped counter to increase on my Proxmox server. I’ve confirmed that it is lldpd on the WAPs that are generating the "bad" traffic, as it stops when I stop and disable the service on the […]