Tag: idProduct=0002

Only one HDMI port recognized on USB-C dock

Post author By Linux Questions
Post date February 20, 2021
No Comments on Only one HDMI port recognized on USB-C dock

I’ve gotten my hands on a JCD543 and only the HDMI/DP combination port is detected on my carbon x1 5th gen running linux while the secondary HDMI and VGA port are not. $ dmesg -w [337962.676809] pci 0000:06:00.0: [8086:15d3] type 01 class 0x060400 [337962.676877] pci 0000:06:00.0: enabling Extended Tags [337962.677063] pci 0000:06:00.0: supports D1 D2 […]

Tags assigned bus number 3 [337962.682851] xhci_hcd 0000:3c:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810 [337962.684331, assigned bus number 4 [337962.685401] xhci_hcd 0000:3c:00.0: Host supports USB 3.1 Enhanced SuperSpeed [337962.685438] usb usb4: New USB devi, bcdDevice= 0.01 [337967.171903] usb 3-1.5: New USB device strings: Mfr=1, bcdDevice= 3.c3 [337963.138800] usb 3-1: New USB device strings: Mfr=1, bcdDevice= 3.c3 [337963.276498] usb 4-1: New USB device strings: Mfr=1, bcdDevice= 5.04 [337962.684333] usb usb3: New USB device strings: Mfr=3, bcdDevice= 5.04 [337962.685439] usb usb4: New USB device strings: Mfr=3, bcdDevice=10.10 [337964.196084] usb 4-1.4: New USB device strings: Mfr=1, bcdDevice=15.39 [337965.353572] usb 4-1.3.2: New USB device strings: Mfr=3, bcdDevice=31.00 [337965.547262] usb 4-1.3.3: New USB device strings: Mfr=1, bcdDevice=90.54 [337963.987575] usb 3-1.3: New USB device strings: Mfr=1, bcdDevice=90.54 [337964.113968] usb 4-1.3: New USB device strings: Mfr=1, current 6400 x 1440, I've gotten my hands on a JCD543 and only the HDMI/DP combination port is detected on my carbon x1 5th gen running linux while the secondary, idProduct=0002, idProduct=0003, idProduct=0749, idProduct=0817, idProduct=2817, idProduct=5601, idProduct=8153, idProduct=8888, idVendor=05e3, idVendor=0711, idVendor=0bda, idVendor=1d6b, idVendor=2109, Inc. [337963.138802] usb 3-1: SerialNumber: DEF0123456789ABC [337963.139599] hub 3-1:1.0: USB hub found [337963.139772] hub 3-1:1.0: 5 ports, Inc. [337963.276501] usb 4-1: SerialNumber: DEF0123456789ABC [337963.278397] hub 4-1:1.0: USB hub found [337963.278609] hub 4-1:1.0: 4 ports, Inc. [337963.988591] hub 3-1.3:1.0: USB hub found [337963.988799] hub 3-1.3:1.0: 4 ports detected [337964.081329] usb 4-1.3: new SuperSpeed G, Inc. [337964.116090] hub 4-1.3:1.0: USB hub found [337964.116300] hub 4-1.3:1.0: 4 ports detected [337964.183683] usb 4-1.4: new SuperSpeed G, Inc. [337967.171906] usb 3-1.5: SerialNumber: 0000000000000001 $ lspci 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th G, limited by 2.5 GT/s x4 link at 0000:07:02.0 (capable of 31.504 Gb/s with 8 GT/s x4 link) [337962.680274] pci 0000:07:02.0: PCI bridge to [bus, Ltd. RTS525A PCI Express Card Reader (rev 01) 04:00.0 Network controller: Intel Corporation Wireless 8265 / 8275 (rev 88) 05:00.0 Non-Volatil, product[2], product[4], SerialNumber=0 [337963.987576] usb 3-1.3: Product: USB2.0 Hub [337963.987576] usb 3-1.3: Manufacturer: VIA Labs, SerialNumber=0 [337964.113969] usb 4-1.3: Product: USB3.0 Hub [337964.113971] usb 4-1.3: Manufacturer: VIA Labs, SerialNumber=0 [337964.196085] usb 4-1.4: Product: USB Station [337964.196086] usb 4-1.4: Manufacturer: MCT Corp. [337965.337154] usb 4-1.3.2, SerialNumber=1 [337962.684334] usb usb3: Product: xHCI Host Controller [337962.684336] usb usb3: Manufacturer: Linux 5.4.92-gentoo-x86_64 xhc, SerialNumber=1 [337962.685440] usb usb4: Product: xHCI Host Controller [337962.685442] usb usb4: Manufacturer: Linux 5.4.92-gentoo-x86_64 xhc, SerialNumber=2 [337965.353573] usb 4-1.3.2: Product: USB3.0 Card Reader [337965.353574] usb 4-1.3.2: Manufacturer: Generic [337965.353574] us, SerialNumber=3 [337963.138801] usb 3-1: Product: USB2.0 Hub [337963.138802] usb 3-1: Manufacturer: VIA Labs, SerialNumber=3 [337963.276499] usb 4-1: Product: USB3.0 Hub [337963.276500] usb 4-1: Manufacturer: VIA Labs, SerialNumber=3 [337967.171904] usb 3-1.5: Product: USB Billboard Device [337967.171905] usb 3-1.5: Manufacturer: VIA Labs, SerialNumber=6 [337965.547263] usb 4-1.3.3: Product: USB 10/100/1000 LAN [337965.547264] usb 4-1.3.3: Manufacturer: Realtek [337965.547264] u

Raspberry Pi User Help

Fail to install alpine linux in sysmode

Post author By How To
Post date January 15, 2021
No Comments on Fail to install alpine linux in sysmode

I have a raspberry pi 2B and I wanted to install alpine linux in sys mode. I use a 64gb microsd samsung evo plus. I followed the wiki of alpine here formatting like in troubleshot the boot partition in fat32. However that doesn’t seem to work. Something happened to be different in the responses to […]

Tags 'CMA', "cpu": 0, "cpu": 1, 1024K init, 16384 bytes, 2620K rodata, 262144 bytes, 26872K reserved, 32768 bytes, 4 CPUs [ 0.009458] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.009465] CPU: All CPU(s) started in HYP mode. [ 0.0094, 4096 bytes) [ 1.278643] FS-Cache: Loaded [ 1.278993] CacheFiles: Loaded [ 1.295208] thermal_sys: Registered thermal governor 'step_w, 5 counters available [ 1.563574] Initialise system trusted keyrings [ 1.564023] workingset: timestamp_bits=14 max_order=18 bucket_order, 524288 bytes, 6144 bytes, 65536 bytes, 65536K cma-reserved) [ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x38/0x4dc with crng_init=0 [ 0.000000] SLUB: H, 697K rwdata, 8192 bytes, 819K bss, assigned bus number 1 [ 2.626646] dwc_otg 3f980000.usb: irq 56, assuming write-enable [ 2.782024] mmc0: new high speed SDXC card at address 0001 [ 2.783246] mmcblk0: mmc0:0001 EC2QT 59.6 GiB [ 2.7, b8:27:eb:c7:34:e6 Since I followed all the instructions, base_baud = 0) is a PL011 rev2 [ 2.671055] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 2.672607] sdhost: log_b, bcdDevice= 2.00 [ 3.304662] usb 1-1: New USB device strings: Mfr=0, bcdDevice= 2.00 [ 3.754483] usb 1-1.1: New USB device strings: Mfr=0, bcdDevice= 5.04 [ 2.627081] usb usb1: New USB device strings: Mfr=3, compatible id shared-dma-pool [ 0.000000] On node 0 totalpages: 242688 [ 0.000000] Normal zone: 2133 pages used for memmap [ 0.000, cpu 2, cpu 3, CPUs=4, cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, deferring probe [ 2.637721] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.639313] ledtrig-cpu: registered to indicate activity o, dmachans=0x1 [ 0.177570] SCSI subsystem initialized [ 0.178808] usbcore: registered new interface driver usbfs [ 0.179024] usbcore:, heap alloc:off, heap free:off [ 0.000000] Memory: 878344K/970752K available (8192K kernel code, I don't know where to find these logs to copy them as text Then, I have a raspberry pi 2B and I wanted to install alpine linux in sys mode. I use a 64gb microsd samsung evo plus. I followed the wiki of alpi, idProduct=0002, idProduct=9514, idProduct=ec00, idVendor=0424, idVendor=1d6b, io mem 0x00000000 [ 2.626694] Init: Port Power? op_state=1 [ 2.626700] Init: Power Port (0) [ 2.627067] usb usb1: New USB device fou, LIFO batch:63 [ 0.000000] percpu: Embedded 20 pages/cpu s49676 r8192 d24052 u81920 [ 0.000000] pcpu-alloc: s49676 r8192 d24052 u81920 a, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, linear) [ 0.000000] mem auto-init: stack:off, linear) [ 0.001022] Mountpoint-cache hash table entries: 2048 (order: 1, linear) [ 0.002633] Disabling memory control group subsystem [ 0.002809] CPU: Testing write buffer coherency: ok [ 0.003447] CPU0: u, linear) [ 0.029607] pinctrl core: initialized pinctrl subsystem [ 0.032246] NET: Registered protocol family 16 [ 0.035488] DMA: prea, linear) [ 1.296905] TCP established hash table entries: 8192 (order: 3, linear) [ 1.297034] TCP bind hash table entries: 8192 (order: 4, linear) [ 1.297235] TCP: Hash tables configured (established 8192 bind 8192) [ 1.297432] UDP hash table entries: 512 (order: 2, linear) [ 1.297498] UDP-Lite hash table entries: 512 (order: 2, linear) [ 1.297865] NET: Registered protocol family 1 [ 1.298750] RPC: Registered named UNIX socket transport module. [ 1.298760] RP, ln -s media/mmcblk0p1/boot boot is expected to give an error but it didn't gave one and the reboot doesn't takes minutes like it is written i, max_idle_ns: 19112604462750000 ns [ 0.025916] futex hash table entries: 1024 (order: 4, max_idle_ns: 440795202767 ns [ 0.000010] sched_clock: 56 bits at 19MHz, MinObjects=0, mobility grouping on. Total pages: 240555 [ 0.000000] Kernel command line: coherent_pool=1M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835., mpidr 80000f00 [ 0.004461] Setting up static identity map for 0x100000 - 0x10003c [ 0.004668] rcu: Hierarchical SRCU implementation. [, mpidr 80000f01 [ 0.008021] CPU2: update cpu_capacity 1024 [ 0.008032] CPU2: thread -1, mpidr 80000f02 [ 0.009289] CPU3: update cpu_capacity 1024 [ 0.009299] CPU3: thread -1, mpidr 80000f03 [ 0.009445] smp: Brought up 1 node, my questions are: is there something more that I have to do in order to make it work? Did anybody get it work on 2B? I think yes since it is, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jif, nr_irqs: 16, Order=0-3, OTG VER FLAG: 0 [ 2.625489] Dedicated Tx FIFOs mode [ 2.626375] WARN::dwc_otg_hcd_init:1072: FIQ DMA bounce buffers: virt = b7514000 dm, preallocated irqs: 16 [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask, product[0], product[2], resolution 52ns, resolution 52ns [ 0.000311] Console: colour dummy device 80x30 [ 0.000334] printk: console [tty1] enabled [ 0.000391] Calibrating de, sd-mod, SerialNumber=0 [ 3.306126] hub 1-1:1.0: USB hub found [ 3.306317] hub 1-1:1.0: 5 ports detected [ 3.436006] EXT4-fs (mmcblk0p2): INF, SerialNumber=0 [ 3.757963] smsc95xx v1.0.6 [ 3.849401] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, SerialNumber=1 [ 2.627092] usb usb1: Product: DWC OTG Controller [ 2.627103] usb usb1: Manufacturer: Linux 5.4.84-0-rpi2 dwc_otg_hcd [, size 1680x1050 [ 1.656752] bcm2835-rng 3f104000.rng: hwrng registered [ 1.657178] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux, smsc95xx USB 2.0 Ethernet, so I am missing definitely something., socket 15, squash}fs", this is the dmesg log: [ 0.000000] Booting Linux on physical CPU 0xf00 [ 0.000000] Linux version 5.4.84-0-rpi2 (buildozer@build-3-12-a, usb-storage quiet console=tty1 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000408] pid_max: default: 32768 minimum: 301 [ 0.000731] LSM:, variant start [ 0.080196] raspberrypi-firmware soc:firmware: Firmware hash is 4439d2aaa6c376a2d1ef4402f142e1cf4de37c43 [ 0.173061] bcm2, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B Rev 1.1 [ 0.000000] Memory policy: Data cach, wraps every 4398046511078ns [ 0.000023] Switching to timer-based delay loop

Linux Mastering Development

USB hard drive on OTG not mounted in Arch Linux

Post author By Linux Questions
Post date September 21, 2020
No Comments on USB hard drive on OTG not mounted in Arch Linux

I am trying to mount a USB hard drive (Seagate Backup Plus) via the USB OTG port of my Wandboard on Arch Linux ARM. When I plug in the drive the pilot light flashes several times and Arch Linux finds the device, but finds it as a USB hub: [ 1912.431400] ci_hdrc ci_hdrc.0: new USB […]

Tags 12) FUA bit (array of bool) parm: luns:number of LUNs (uint) parm: stall:false to prevent bulk stalls (bool) ``, assigned bus number 1 [ 1912.452800] ci_hdrc ci_hdrc.0: USB 2.0 started, bcdDevice= 5.08 [ 1912.466803] usb usb1: New USB device strings: Mfr=3, but finds it as a USB hub: [ 1912.431400] ci_hdrc ci_hdrc.0: new USB bus registered, EHCI 1.00 [ 1912.458503] usb usb1: New USB device found, I am trying to mount a USB hard drive (Seagate Backup Plus) via the USB OTG port of my Wandboard on Arch Linux ARM. When I plug in the drive, idProduct=0002, idVendor=1d6b, libcomposite intree: Y name: g_mass_storage vermagic: 5.8.7-1-ARCH SMP preempt mod_unload modversions ARMv7 p2v8 parm, product[2], SerialNumber=1 [ 1912.474060] usb usb1: Product: EHCI Host Controller [ 1912.478967] usb usb1: Manufacturer: Linux 5.8.7-1-ARCH ehci_hcd [ 19, since I already have this module? However I would need help with how to go about enabling the module at boot time in order to be able to moun

Linux Mastering Development

USB hard drive on OTG not mounted in Arch Linux

Post author By Linux Questions
Post date September 19, 2020
No Comments on USB hard drive on OTG not mounted in Arch Linux

Tags assigned bus number 1 [ 1912.452800] ci_hdrc ci_hdrc.0: USB 2.0 started, bcdDevice= 5.08 [ 1912.466803] usb usb1: New USB device strings: Mfr=3, but finds it as a USB hub: [ 1912.431400] ci_hdrc ci_hdrc.0: new USB bus registered, EHCI 1.00 [ 1912.458503] usb usb1: New USB device found, I am trying to mount a USB hard drive (Seagate Backup Plus) via the USB OTG port of my Wandboard on Arch Linux ARM. When I plug in the drive, idProduct=0002, idVendor=1d6b, product[2], SerialNumber=1 [ 1912.474060] usb usb1: Product: EHCI Host Controller [ 1912.478967] usb usb1: Manufacturer: Linux 5.8.7-1-ARCH ehci_hcd [ 19

Linux Mastering Development

USB hard drive on OTG not mounted in Arch Linux

Post author By Linux Questions
Post date September 17, 2020
No Comments on USB hard drive on OTG not mounted in Arch Linux

Tags assigned bus number 1 [ 1912.452800] ci_hdrc ci_hdrc.0: USB 2.0 started, bcdDevice= 5.08 [ 1912.466803] usb usb1: New USB device strings: Mfr=3, but finds it as a USB hub: [ 1912.431400] ci_hdrc ci_hdrc.0: new USB bus registered, EHCI 1.00 [ 1912.458503] usb usb1: New USB device found, I am trying to mount a USB hard drive (Seagate Backup Plus) via the USB OTG port of my Wandboard on Arch Linux ARM. When I plug in the drive, idProduct=0002, idVendor=1d6b, product[2], SerialNumber=1 [ 1912.474060] usb usb1: Product: EHCI Host Controller [ 1912.478967] usb usb1: Manufacturer: Linux 5.8.7-1-ARCH ehci_hcd [ 19

Linux Mastering Development

USB hard drive on OTG not mounted in Arch Linux

Post author By Linux Questions
Post date September 16, 2020
No Comments on USB hard drive on OTG not mounted in Arch Linux

Tags assigned bus number 1 [ 1912.452800] ci_hdrc ci_hdrc.0: USB 2.0 started, bcdDevice= 5.08 [ 1912.466803] usb usb1: New USB device strings: Mfr=3, but finds it as a USB hub: [ 1912.431400] ci_hdrc ci_hdrc.0: new USB bus registered, EHCI 1.00 [ 1912.458503] usb usb1: New USB device found, I am trying to mount a USB hard drive (Seagate Backup Plus) via the USB OTG port of my Wandboard on Arch Linux ARM. When I plug in the drive, idProduct=0002, idVendor=1d6b, product[2], SerialNumber=1 [ 1912.474060] usb usb1: Product: EHCI Host Controller [ 1912.478967] usb usb1: Manufacturer: Linux 5.8.7-1-ARCH ehci_hcd [ 19

User Help

Unable to enable / configure bluetouth for Lenovo Y520

Post author By How To
Post date July 16, 2020
No Comments on Unable to enable / configure bluetouth for Lenovo Y520

I have Lenovo Y520 (Legion) with Gentoo and failed to setup bluetouth support. As documentation says: Bluetooth wireless • Combo w/ Wifi card I followed the instruction from https://wiki.gentoo.org/wiki/Bluetooth but still no luck. Linux Kernel: 5.7.8-gentoo Kernel Config: $ cat /usr/src/linux/.config | egrep -i "usb|blue" | grep -v ‘^#’ CONFIG_USB_NET_DRIVERS=y CONFIG_MOUSE_SYNAPTICS_USB=m CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y CONFIG_USB_GSPCA=m […]

Tags assigned bus number 1 [ 0.519274] usb usb1: New USB device found, assigned bus number 2 [ 0.519920] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.519947] usb usb2: New USB device found, bcdDevice= 0.10 [ 1.695950] usb 1-11: New USB device strings: Mfr=0, bcdDevice= 5.07 [ 0.519277] usb usb1: New USB device strings: Mfr=3, bcdDevice= 5.07 [ 0.519949] usb usb2: New USB device strings: Mfr=3, bcdDevice=12.09 [ 0.972500] usb 1-3: New USB device strings: Mfr=1, bcdDevice=87.40 [ 1.437557] usb 1-6: New USB device strings: Mfr=3, bluetoothctl shows nothing: $ bluetoothctl Agent registered [bluetooth]# list [bluetooth]# Relevant part of lshw: *-pci descrip, hiddev96, hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0 [ 1.029077] input: Logitech USB Receiver Mouse as /de, hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1 [ 1.081800] hid-generic 0003:046D:C52B.0003: hiddev97, hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2 [ 1.250159] usb 1-6: new high-speed USB device number 3, I have Lenovo Y520 (Legion) with Gentoo and failed to setup bluetouth support. As documentation says: Bluetooth wireless • Combo w/ Wifi car, idProduct=0002, idProduct=0003, idProduct=0a2b, idProduct=b57e, idProduct=c52b, idVendor=046d, idVendor=04f2, idVendor=1d6b, idVendor=8087, Inc. SD/MMC Card Reader Controller (rev 01) Subsystem: Lenovo SD/MMC Card Reader Controller 03:00.0 Network controller: Intel Corporation, Inc. Unifying Receiver Bus 001 Device 004: ID 8087:0a2b Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub PCI: $, Ltd EasyCamera Bus 001 Device 002: ID 046d:c52b Logitech, Ltd. [ 1.437559] usb 1-6: SerialNumber: 0001 [ 1.454746] input: EasyCamera: EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6, Ltd. physical id: 6 bus info: usb@1:6 version: 87.40 serial: 0001, Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10) Subsystem: Lenovo RTL8111/8168/8411 PCI Express Gigabit Ethernet C, product[0], product[1], product[2], rmi_i2c elan_i2c 40960 0 synaptics_usb 16384 0 synaptics_i2c 16384 0 ntfs 212992 0 ecb, SerialNumber=0 [ 0.972501] usb 1-3: Product: USB Receiver [ 0.972502] usb 1-3: Manufacturer: Logitech [ 0.974553] input: Logitech US, SerialNumber=0 rfkill: $ rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Note, SerialNumber=1 [ 0.519279] usb usb1: Product: xHCI Host Controller [ 0.519281] usb usb1: Manufacturer: Linux 5.7.8-gentoo xhci-hcd [, SerialNumber=1 [ 0.519951] usb usb2: Product: xHCI Host Controller [ 0.519953] usb usb2: Manufacturer: Linux 5.7.8-gentoo xhci-hcd [, SerialNumber=2 [ 1.437557] usb 1-6: Product: EasyCamera [ 1.437558] usb 1-6: Manufacturer: Chicony Electronics Co., snd_hda_codec, snd_hda_codec_realtek snd_hwdep 16384 1 snd_hda_codec snd_hda_core 77824 4 snd_hda_codec_generic, snd_hda_codec_realtek snd_pcm 102400 3 snd_hda_intel, snd_hda_core iwlmvm 348160 0 intel_rapl_msr 20480 0 intel_rapl_common 28672 1 intel_rapl_msr intel_powerclamp, snd_hda_intel, usb_serial_simple snd_hda_codec_realtek 106496 1 snd_hda_codec_generic 77824 2 snd_hda_codec_realtek snd_hda_intel 36864 6 s, uvcvideo i2c_mux 16384 0 bluetooth 462848 6 ecdh_generic 16384 1 bluetooth ecc 327, uvcvideo videobuf2_common 49152 3 gspca_main, uvcvideo videobuf2_memops 16384 1 videobuf2_vmalloc videobuf2_v4l2 24576 2 gspca_main, uvcvideo videodev 212992 3 gspca_main, videobuf2_v4l2

Linux Mastering Development

KVM guest unbootable after mkinitramfs – mounting /dev/vda1 on /root failed

Post author By Linux Questions
Post date June 25, 2020
No Comments on KVM guest unbootable after mkinitramfs – mounting /dev/vda1 on /root failed

25/06/20 Edited: added some additional diag information I have an issue where a KVM guest will work flawlessly up until mkinitramfs is run (Kernel upgrade, Grub cfg change, etc), after which the system fails to boot. Grub menu appears Any selected option from the menu then results in the system failing to the initramfs Busybox […]

Tags 25/06/20 Edited: added some additional diag information I have an issue where a KVM guest will work flawlessly up until mkinitramfs is run (, a few key packages installed, after which the system fails to boot. Grub menu appears Any selected option from the menu then results in the system failing to the initram, and one post, and then kpartx -d to clean up Suitable config is added to KVM for the new guest with the new volume as its disk This all works fine. The g, assigned bus number 1 [ 0.857900] xhci_hcd 0000:02:00.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010 [ 0.859088], bcdDevice= 4.19 [ 0.860056] usb usb1: New USB device strings: Mfr=3, cos it is just goes on to load and initialise a bunch of IO as you would expect, etc., etc). Then when the script runs: An LVM snapshop is taken of the volume backing the base image kpartx -a /path/to/snapshot is run to get a, Grub cfg change, however if I do exactly the same on base guest image (see below), I do not see this problem, idProduct=0002, idVendor=1d6b, IPV6 disabled, particularly virt-resize. ======== Guest Build Method ========= Prereq: A base Debian guest is manually installed using a very small LVM ba, product[2], right up until the first time mkinitramfs runs on the guest. Does anybody have any thoughts/ideas on what might be happening and how it coul, SerialNumber=1 [ 0.860056] usb usb1: Product: xHCI Host Controller [ 0.860057] usb usb1: Manufacturer: Linux 4.19.0-9-amd64 xhci-hcd [, then booted each passing the break=premount kernel option to force them both out into the initramfs debug shell. From there I have tried comp, where the broken host does not. lsmod on the broken host confirms the SCSI module is not loaded. modprobe -v scsi_mod does not load the modu, which somehow pins it to the method I use to clone these guest images

Linux Mastering Development

Thunderbolt – Displayport Monitors not detected on reboot. XPS 13 Arch Linux (endeavourOS)

Post author By Linux Questions
Post date June 23, 2020
No Comments on Thunderbolt – Displayport Monitors not detected on reboot. XPS 13 Arch Linux (endeavourOS)

I am running EndeavourOS (Arch) on a 2017 Dell XPS 13. Kernel 5.7.2-arch1-1 [Hardware name: Dell Inc. XPS 13 9360/02PG84, BIOS 2.13.0 11/14/2019] I have a multi-monitor setup at my desk, that, when working has the following config: xrandr: eDP1 connected primary 1920×1080+0+0 (normal left inverted right x axis y axis) 290mm x 170mm 1920×1080 […]

Tags -19 Jun 23 10:43:31 lvtu kernel: xhci_hcd 0000:39:00.0: Host not accessible, 'that', (Receiver ID) Jun 23 10:43:37 lvtu kernel: pcieport 0000:00:1c.0: AER: device [8086:9d10] error status/mask=00002001/00002000 Jun 23 10:43:, 0, assigned bus number 3 Jun 23 10:43:42 lvtu kernel: xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810 J, assigned bus number 4 Jun 23 10:43:42 lvtu kernel: xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed Jun 23 10:43:42 lvtu kern, assume dead Jun 23 10:43:31 lvtu kernel: xhci_hcd 0000:39:00.0: HC died; cleaning up Jun 23 10:43:31 lvtu kernel: pcieport 0000:00:1c.0: EDR:, bcdDevice= 5.07, bcdDevice= 5.07 Jun 23 10:43:42 lvtu kernel: usb usb3: New USB device strings: Mfr=3, BIOS 2.13.0 11/14/2019 Jun 23 10:43:32 lvtu kernel: Workqueue: events drm_dp_delayed_destroy_work [drm_kms_helper] Jun 23 10:43:32 lvtu kerne, BIOS 2.13.0 11/14/2019] I have a multi-monitor setup at my desk, device number 1 Jun 23 10:43:31 lvtu kernel: xhci_hcd 0000:39:00.0: Host halt failed, device number 1 Jun 23 10:43:31 lvtu kernel: xhci_hcd 0000:39:00.0: USB bus 4 deregistered Jun 23 10:43:31 lvtu kernel: xhci_hcd 0000:39:00.0, device number 2 Jun 23 10:43:31 lvtu kernel: xhci_hcd 0000:39:00.0: remove, I am running EndeavourOS (Arch) on a 2017 Dell XPS 13. Kernel 5.7.2-arch1-1 [Hardware name: Dell Inc. XPS 13 9360/02PG84, idProduct=0002, idProduct=0003, idVendor=1d6b, limited by 2.5 GT/s PCIe x4 link at 0000:02:02.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) Jun 23 10:43:42 lvtu kernel: pci 0000:02, limited by 8.0 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) Jun 23 10:43:42 lvtu kernel: pci 0000:02, or failing that - a way to 'jolt' the os into detecting them? Below is the output from lspic and journalctl just after plugging each monitor, position (1920, product[2], reflection none Jun 22 09:53:34 lvtu autorandr[7597]: Failed to load profile 'default': Profile not found (line 1413) Jun 22 09:53:34 lvtu au, reset failed. Jun 23 10:43:32 lvtu kernel: xhci_hcd 0000:39:00.0: USB bus 3 deregistered Jun 23 10:43:32 lvtu kernel: pci_bus 0000:02: Alloca, rotation left, SerialNumber=1 Jun 23 10:43:42 lvtu kernel: usb usb3: Product: xHCI Host Controller Jun 23 10:43:42 lvtu kernel: usb usb3: Manufacturer: Linu, state 1 Jun 23 10:43:31 lvtu kernel: usb usb3: USB disconnect, state 4 Jun 23 10:43:31 lvtu kernel: usb usb4: USB disconnect, then plug them back in one by one. Unplugging the adapter at the thunderbolt/usbc port does not result in the monitors working or even showin, type=Physical Layer, when working has the following config: xrandr: eDP1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 290mm x 170m

Linux Mastering Development

usb 2-6: unable to read config error -71

Post author By Linux Questions
Post date June 3, 2020
No Comments on usb 2-6: unable to read config error -71

How do i sort the error below: [ 4.138395] usb 2-6: unable to read config index 0 descriptor/start: -71 [ 4.138400] usb 2-6: can’t read configurations, error -71 My Linux system info Linux 5.3.0-53-generic #47~18.04.1-Ubuntu SMP Thu May 7 13:10:50 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux My dmesg detailed output is below dmesg | grep […]

Tags .product14, bcdDevice= 0.01 [ 1.841156] usb 2-4: New USB device strings: Mfr=0, bcdDevice= 0.04 [ 1.460563] usb 1-1: New USB device strings: Mfr=0, bcdDevice= 0.20 [ 51.093407] usb 2-6: New USB device strings: Mfr=4, bcdDevice= 1.00 [ 1.560034] usb 2-3: New USB device strings: Mfr=3, bcdDevice= 1.00 [ 16.739165] usb 2-7: New USB device strings: Mfr=0, bcdDevice= 5.03 [ 1.096025] usb usb1: New USB device strings: Mfr=3, bcdDevice= 5.03 [ 1.097818] usb usb2: New USB device strings: Mfr=3, bcdDevice= 5.03 [ 1.098362] usb usb3: New USB device strings: Mfr=3, error -110 [ 16.460036] usb usb2-port6: unable to enumerate USB device [ 16.587955] usb 2-7: new low-speed USB device number 8 using xhci_hcd, error -71 [ 19.307952] usb 2-6: new full-speed USB device number 10 using xhci_hcd [ 21.477867] usb 2-6: unable to read config index 0 descri, error -71 [ 21.477920] usb usb2-port6: attempt power cycle [ 22.127954] usb 2-6: new full-speed USB device number 11 using xhci_hcd [ 24.1694, error -71 [ 24.295954] usb 2-6: new full-speed USB device number 12 using xhci_hcd [ 26.338314] usb 2-6: unable to read config index 0 descri, error -71 [ 26.338363] usb usb2-port6: unable to enumerate USB device [ 26.344720] usbcore: registered new interface driver usbhid [ 26.34472, error -71 [ 28.943977] usb 2-6: new full-speed USB device number 14 using xhci_hcd [ 31.114079] usb 2-6: unable to read config index 0 descri, error -71 [ 31.114126] usb usb2-port6: attempt power cycle [ 31.763948] usb 2-6: new full-speed USB device number 15 using xhci_hcd [ 33.8058, error -71 [ 33.935930] usb 2-6: new full-speed USB device number 16 using xhci_hcd [ 35.977159] usb 2-6: unable to read config index 0 descri, error -71 [ 35.977209] usb usb2-port6: unable to enumerate USB device [ 36.287947] usb 2-6: new full-speed USB device number 17 using xhci_hc, error -71 [ 38.595937] usb 2-6: new full-speed USB device number 18 using xhci_hcd [ 40.769529] usb 2-6: unable to read config index 0 descri, error -71 [ 4.263952] usb 2-6: new full-speed USB device number 5 using xhci_hcd [ 6.434721] usb 2-6: unable to read config index 0 descripto, error -71 [ 40.769583] usb usb2-port6: attempt power cycle [ 41.419957] usb 2-6: new full-speed USB device number 19 using xhci_hcd [ 43.4603, error -71 [ 43.587905] usb 2-6: new full-speed USB device number 20 using xhci_hcd [ 45.632993] usb 2-6: unable to read config index 0 descri, error -71 [ 45.633026] usb usb2-port6: unable to enumerate USB device [ 45.943905] usb 2-6: new full-speed USB device number 21 using xhci_hc, error -71 [ 48.247893] usb 2-6: new full-speed USB device number 22 using xhci_hcd [ 50.420700] usb 2-6: unable to read config index 0 descri, error -71 [ 50.420765] usb usb2-port6: attempt power cycle [ 51.071932] usb 2-6: new full-speed USB device number 23 using xhci_hcd [ 51.0934, error -71 [ 6.434776] usb usb2-port6: attempt power cycle [ 7.083950] usb 2-6: new full-speed USB device number 6 using xhci_hcd [ 9.126309], error -71 [ 9.251953] usb 2-6: new full-speed USB device number 7 using xhci_hcd [ 16.459984] usb 2-6: unable to read config index 0 descript, error -71 My Linux system info Linux 5.3.0-53-generic #47~18.04.1-Ubuntu SMP Thu May 7 13:10:50 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux My, hiddev0, hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:14.0-7/input0 [ 26.647945] usb 2-6: new full-speed USB device number 13 usin, hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-6/input0 [ 52.134419] input: ELAN Touchscreen as /devices/pci0000:00/000, hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-6/input0 [ 52.837522] usbcore: registered new interface driver btusb [ 5, How do i sort the error below: [ 4.138395] usb 2-6: unable to read config index 0 descriptor/start: -71 [ 4.138400] usb 2-6: can't read conf, idProduct=0002, idProduct=0003, idProduct=0085, idProduct=07dc, idProduct=0ba6, idProduct=8000, idProduct=e330, idVendor=04f3, idVendor=064e, idVendor=1d6b, idVendor=275d, idVendor=8087, product[0], product[1], product[2], SerialNumber=0 [ 1.560031] usb 2-3: New USB device found, SerialNumber=0 [ 1.560035] usb 2-3: Product: HD WebCam [ 1.560037] usb 2-3: Manufacturer: SuYin [ 1.691932] usb 2-4: new full-speed USB devic, SerialNumber=0 [ 1.967949] usb 2-6: new full-speed USB device number 4 using xhci_hcd [ 4.138395] usb 2-6: unable to read config index 0 desc, SerialNumber=0 [ 16.739167] usb 2-7: Product: USB OPTICAL MOUSE [ 17.011950] usb 2-6: new full-speed USB device number 9 using xhci_hcd [ 19., SerialNumber=0 [ 51.093408] usb 2-6: Product: Touchscreen [ 51.093409] usb 2-6: Manufacturer: ELAN [ 51.100449] input: ELAN Touchscreen as /d, SerialNumber=1 [ 1.096026] usb usb1: Product: EHCI Host Controller [ 1.096028] usb usb1: Manufacturer: Linux 5.3.0-53-generic ehci_hcd [ 1.09, SerialNumber=1 [ 1.097820] usb usb2: Product: xHCI Host Controller [ 1.097821] usb usb2: Manufacturer: Linux 5.3.0-53-generic xhci-hcd [ 1.09, SerialNumber=1 [ 1.098363] usb usb3: Product: xHCI Host Controller [ 1.098364] usb usb3: Manufacturer: Linux 5.3.0-53-generic xhci-hcd [ 1.09