I have a network printer (Samsung) connected to WiFi router, printing from notebook (Win7) connected to the same router using WiFi worked well; DHCP – network 192.168.8.0/24, gateway 192.168.8.1, printer on standard TCP/IP port – 192.168.8.50. I connected the wired NIC to some specialized device (USG) – static IP, network 192.168.2.1/24, no gateway, USG IP […]
- Tags even with wired NIC connected. Tracert routed through wireless NIC. Is there any "search for printer" phase, gateway 192.168.8.1, I have a network printer (Samsung) connected to WiFi router, network 192.168.2.1/24, no gateway, printer on standard TCP/IP port - 192.168.8.50. I connected the wired NIC to some specialized device (USG) - static IP, printing from notebook (Win7) connected to the same router using WiFi worked well; DHCP - network 192.168.8.0/24, printing started immediately. PINGing printer address shows no delays, USG IP 192.168.2.2 - direct connection. Each print is delayed by approx. 30 seconds (no matter of document size). I tried to disable the wire, which can be skipped / skipped for selected interface? Thank you for reading.