Lost connection to the server after adding new bridge to network configuration

In a Proxmox server (Debian), I changed my network config from this: source /etc/network/interfaces.d/* auto lo iface lo inet loopback auto enp0s31f6 iface enp0s31f6 inet static address 88.99.69.241 netmask 255.255.255.192 gateway 88.99.69.193 up route add -net 88.99.69.192 netmask 255.255.255.192 gw 88.99.69.193 dev enp0s31f6 post-up echo 1 > /proc/sys/net/ipv4/conf/enp0s31f6/proxy_arp # route 88.99.69.192/26 via 88.99.69.193 auto vmbr1…

Kubernetes with kops in AWS – how to attach IAM policies to the IAM role used to create services?

Learning to K8 with Kops within AWS (I’m ok in the AWS zone I think), I’m working through setting up a simple service described in this medium article: After deploying the service I get an IAM permissions error (redacted account number & domain name): Warning SyncLoadBalancerFailed 19m service-controller Error syncing load balancer: failed to ensure…

How to set a Virtual IP in Vagrant?

As this architecture example, it needs 5 servers, a virtual IP to connect to the cluster. enter image description here Now want to use Vagrant to create servers on VMs. Here is the Vagrantfile: Vagrant.configure(“2”) do |config| config.vm.box = “centos/7” config.vm.define “db-primary” do |c| c.vm.network “public_network”, ip: “13.24.35.1” c.vm.network :forwarded_port, host: 5432, guest: 5432, protocol:…