Persisting GCP Datalab instance even in case of disconnect when launching from cloud shell

When launching Datalab from the GCP Cloud Shell, it launches an instances accessible from localhost:8080. But the command only persists the connection to Datalab when cloud shell is open and connected. Whenever connection to cloud shell is launched, training running on the Datalab instance (GCE) is lost. How do I work with Datalab and persist…

DNS-Mystery: domain only loads on my phone & not desktop — ip works for everything — domain works on other peoples desktop not my gf’s phone

So my domain www.jasonwarner.dev had its name servers forwarded to my unmanaged VPS provider 2 days ago, 24hrs ago I added the domain to my VPS with A record and it activated in about 1 hour, I can access my “site” through IP on any device but not through domain on my desktop. The chat…

Debian IPv6 config not applying to one network interface

So I have a Debian Buster system running radvd which also has a /etc/network/interfaces and for some reason only my wlan0 interface has an IPv6 address from my allocated /64 and not the eth0 interface despite no apparent differences in configuration. 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether…

How can I configure multiple ethernet ports system to have multiple IP addresses on each ports in same network? [closed]

In a system with multiple ethernet ports via multiple ethernet cards, I’d like to assign different IPs on each ports (or on each ethernet adapters), but want them to be in a same subnet.(Netmask is 255.255.255.0 for all dapters/ports. Network address is 192.168.0.0) The system is ubuntu 18.04 and QNX7.0 How can I do this…