Categories
Linux Mastering Development Ubuntu

Cannot use apt/curl/wget/git but can Ping

I have a raspberry pi running ubuntu server 20 and cannot connect to the internet, but can use ping. This question has been asked by many before, however the solutions provided in those questions do not solve my issue.

I can ping www.ubuntu.com

64 bytes from cactuar.canonical.com (91.189.88.180): icmp_seq=3 ttl=45 time=118 ms

but I cannot use sudo apt update

Could not connect to ports.ubuntu.com:80 (91.189.88.150), connection timed out

I get similar errors when using curl. I have checked my iptables and i dont see anything

Chain INPUT (policy ACCEPT 113 packets, 8043 bytes)
 pkts bytes target     prot opt in     out     source               destination

Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination

Chain OUTPUT (policy ACCEPT 71 packets, 7411 bytes)
 pkts bytes target     prot opt in     out     source               destination

I have UFW disabled (ufw status):

Status: inactive

I set a static IP via netplan and the file is below (cat /etc/netplan/netconf.yaml) and created the /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg file:

network:
  version: 2
  ethernets:
    eth0:
      dhcp4: no
      addresses: [100.65.225.70/24]
      gateway4: 100.65.225.1
      nameservers:
        addresses: [8.8.8.8, 8.8.4.4]

The ouput of ip addr show is:

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether b8:27:eb:01:4f:8d brd ff:ff:ff:ff:ff:ff
    inet 100.65.225.70/24 brd 100.65.225.255 scope global eth0
       valid_lft forever preferred_lft forever
3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN group default qlen 1000
    link/ether b8:27:eb:54:1a:d8 brd ff:ff:ff:ff:ff:ff

I have read that something could be blocking port 80, but I am not seeing anything doing so. Can someone please let me know what else could cause this issue?

Leave a Reply

Your email address will not be published. Required fields are marked *